Feedback Print

Linux

The automatic installation already comes with the IBM DB2 preconfigured, only needing to install the client to make the connection.

If you’re using your own environment preconfigured, you’ll need to enable the IBM DB2 extension in PHP.

DB2

Setting up DB2 on Linux

The automatic installation already comes with the IBM DB2 preconfigured, only needing to install the client so that you can do the connection.

  • Install the dependencies below:
UBUNTU\DEBIAN CENTOS\RHEL
- sudo apt-get update - sudo yum update
- sudo apt-get install libaio1 - sudo yum install libaio-devel
- sudo apt-get install libncurses5 - sudo yum install libaio
- sudo apt-get install alien - sudo yum install glibc
- sudo apt-get install gcc-multilib g++-multilib - sudo yum install compat-libstdc++-33
- sudo apt-get install libpam0g - sudo yum install glibc-devel
- sudo apt-get install ksh - sudo yum install libstdc++
- sudo apt-get install unixodbc-dev unixodbc - sudo yum install libstdc++
  - sudo yum install pam
  - sudo yum install ncurses-devel
  - sudo yum install unixODBC
  - sudo wget ftp://195.220.108.108/linux/centos/6.7/os/i386/Packages/ksh-20120801-28.el6.i686.rpm
  - sudo yum install ksh-20120801-28.el6.i686.rpm
  - sudo yum install nano

Installing DsDriver IBM DB2

Architecture x86 Architecture x64
sudo mkdir -p /opt/IBM/Db2 sudo mkdir -p /opt/IBM/x64/db2
sudo cp sudo cp x86_v10.5fp8_linuxia32_dsdriver.tar.gz /opt/IBM/Db2 sudo cp x64_v10.5fp8_linuxx64_dsdriver.tar.gz /opt/IBM/x64/db2
sudo tar -zxf /opt/IBM/Db2/x86_v10.5fp8_linuxia32_dsdriver.tar.gz sudo tar -zxf /opt/IBM/x64/db2/x64_v10.5fp8_linuxx64_dsdriver.tar.gz
sudo ksh /opt/IBM/Db2/dsdriver/installDSDriver sudo ksh /opt/IBM/x64/db2/dsdriver/installDSDriver
  sudo source /opt/IBM/x64/db2/dsdriver/db2profile

Restart the Apache Server: sudo /etc/init.d/apachesc9 restart

DB2 Native ODBC

Setting up DB2 Native ODBC on Linux

The automatic installation already comes with the IBM DB2 preconfigured, only needing to install the client so that you can do the connection.

  • Install the dependencies below:
UBUNTU\DEBIAN CENTOS\RHEL
- sudo apt-get update - sudo yum update
- sudo apt-get install libaio1 - sudo yum install libaio-devel
- sudo apt-get install libncurses5 - sudo yum install libaio
- sudo apt-get install alien - sudo yum install glibc
- sudo apt-get install gcc-multilib g++-multilib - sudo yum install compat-libstdc++-33
- sudo apt-get install libpam0g - sudo yum install glibc-devel
- sudo apt-get install ksh - sudo yum install libstdc++
- sudo apt-get install unixodbc-dev unixodbc - sudo yum install libstdc++
  - sudo yum install pam
  - sudo yum install ncurses-devel
  - sudo yum install unixODBC
  - sudo wget ftp://195.220.108.108/linux/centos/6.7/os/i386/Packages/ksh-20120801-28.el6.i686.rpm
  - sudo yum install ksh-20120801-28.el6.i686.rpm
  - sudo yum install nano

Installing DsDriver IBM DB2

Architecture x86 Architecture x64
sudo mkdir -p /opt/IBM/Db2 sudo mkdir -p /opt/IBM/x64/db2
sudo cp sudo cp x86_v10.5fp8_linuxia32_dsdriver.tar.gz /opt/IBM/Db2 sudo cp x64_v10.5fp8_linuxx64_dsdriver.tar.gz /opt/IBM/x64/db2
sudo tar -zxf /opt/IBM/Db2/x86_v10.5fp8_linuxia32_dsdriver.tar.gz sudo tar -zxf /opt/IBM/x64/db2/x64_v10.5fp8_linuxx64_dsdriver.tar.gz
sudo ksh /opt/IBM/Db2/dsdriver/installDSDriver sudo ksh /opt/IBM/x64/db2/dsdriver/installDSDriver
  sudo source /opt/IBM/x64/db2/dsdriver/db2profile

Restart the Apache Server: sudo /etc/init.d/apachesc9 restart

DB2 Generic ODBC

Setting up DB2 Generic ODBC on Linux

The automatic installation already comes with the IBM DB2 preconfigured, only needing to install the client so that you can do the connection.

  • Install the dependencies below:
UBUNTU\DEBIAN CENTOS\RHEL
- sudo apt-get update - sudo yum update
- sudo apt-get install libaio1 - sudo yum install libaio-devel
- sudo apt-get install libncurses5 - sudo yum install libaio
- sudo apt-get install alien - sudo yum install glibc
- sudo apt-get install gcc-multilib g++-multilib - sudo yum install compat-libstdc++-33
- sudo apt-get install libpam0g - sudo yum install glibc-devel
- sudo apt-get install ksh - sudo yum install libstdc++
- sudo apt-get install unixodbc-dev unixodbc - sudo yum install libstdc++
  - sudo yum install pam
  - sudo yum install ncurses-devel
  - sudo yum install unixODBC
  - sudo wget ftp://195.220.108.108/linux/centos/6.7/os/i386/Packages/ksh-20120801-28.el6.i686.rpm
  - sudo yum install ksh-20120801-28.el6.i686.rpm
  - sudo yum install nano

Installing DsDriver IBM DB2

Architecture x86 Architecture x64
sudo mkdir -p /opt/IBM/Db2 sudo mkdir -p /opt/IBM/x64/db2
sudo cp sudo cp x86_v10.5fp8_linuxia32_dsdriver.tar.gz /opt/IBM/Db2 sudo cp x64_v10.5fp8_linuxx64_dsdriver.tar.gz /opt/IBM/x64/db2
sudo tar -zxf /opt/IBM/Db2/x86_v10.5fp8_linuxia32_dsdriver.tar.gz sudo tar -zxf /opt/IBM/x64/db2/x64_v10.5fp8_linuxx64_dsdriver.tar.gz
sudo ksh /opt/IBM/Db2/dsdriver/installDSDriver sudo ksh /opt/IBM/x64/db2/dsdriver/installDSDriver
  sudo source /opt/IBM/x64/db2/dsdriver/db2profile

Restart the Apache Server: sudo /etc/init.d/apachesc9 restart

DB2 Generic ODBC 6 or Lower

Setting up DB2 Generic ODBC 6 or Lower on Linux

The automatic installation already comes with the IBM DB2 preconfigured, only needing to install the client so that you can do the connection.

  • Install the dependencies below:
UBUNTU\DEBIAN CENTOS\RHEL
- sudo apt-get update - sudo yum update
- sudo apt-get install libaio1 - sudo yum install libaio-devel
- sudo apt-get install libncurses5 - sudo yum install libaio
- sudo apt-get install alien - sudo yum install glibc
- sudo apt-get install gcc-multilib g++-multilib - sudo yum install compat-libstdc++-33
- sudo apt-get install libpam0g - sudo yum install glibc-devel
- sudo apt-get install ksh - sudo yum install libstdc++
- sudo apt-get install unixodbc-dev unixodbc - sudo yum install libstdc++
  - sudo yum install pam
  - sudo yum install ncurses-devel
  - sudo yum install unixODBC
  - sudo wget ftp://195.220.108.108/linux/centos/6.7/os/i386/Packages/ksh-20120801-28.el6.i686.rpm
  - sudo yum install ksh-20120801-28.el6.i686.rpm
  - sudo yum install nano

Installing DsDriver IBM DB2

Architecture x86 Architecture x64
sudo mkdir -p /opt/IBM/Db2 sudo mkdir -p /opt/IBM/x64/db2
sudo cp sudo cp x86_v10.5fp8_linuxia32_dsdriver.tar.gz /opt/IBM/Db2 sudo cp x64_v10.5fp8_linuxx64_dsdriver.tar.gz /opt/IBM/x64/db2
sudo tar -zxf /opt/IBM/Db2/x86_v10.5fp8_linuxia32_dsdriver.tar.gz sudo tar -zxf /opt/IBM/x64/db2/x64_v10.5fp8_linuxx64_dsdriver.tar.gz
sudo ksh /opt/IBM/Db2/dsdriver/installDSDriver sudo ksh /opt/IBM/x64/db2/dsdriver/installDSDriver
  sudo source /opt/IBM/x64/db2/dsdriver/db2profile

Restart the Apache Server: sudo /etc/init.d/apachesc9 restart

DB2 PDO

Setting up DB2 PDO on Linux

The automatic installation already comes with the IBM DB2 preconfigured, only needing to install the client so that you can do the connection.

  • Install the dependencies below:
UBUNTU\DEBIAN CENTOS\RHEL
- sudo apt-get update - sudo yum update
- sudo apt-get install libaio1 - sudo yum install libaio-devel
- sudo apt-get install libncurses5 - sudo yum install libaio
- sudo apt-get install alien - sudo yum install glibc
- sudo apt-get install gcc-multilib g++-multilib - sudo yum install compat-libstdc++-33
- sudo apt-get install libpam0g - sudo yum install glibc-devel
- sudo apt-get install ksh - sudo yum install libstdc++
- sudo apt-get install unixodbc-dev unixodbc - sudo yum install libstdc++
  - sudo yum install pam
  - sudo yum install ncurses-devel
  - sudo yum install unixODBC
  - sudo wget ftp://195.220.108.108/linux/centos/6.7/os/i386/Packages/ksh-20120801-28.el6.i686.rpm
  - sudo yum install ksh-20120801-28.el6.i686.rpm
  - sudo yum install nano

Installing DsDriver IBM DB2

Architecture x86 Architecture x64
sudo mkdir -p /opt/IBM/Db2 sudo mkdir -p /opt/IBM/x64/db2
sudo cp sudo cp x86_v10.5fp8_linuxia32_dsdriver.tar.gz /opt/IBM/Db2 sudo cp x64_v10.5fp8_linuxx64_dsdriver.tar.gz /opt/IBM/x64/db2
sudo tar -zxf /opt/IBM/Db2/x86_v10.5fp8_linuxia32_dsdriver.tar.gz sudo tar -zxf /opt/IBM/x64/db2/x64_v10.5fp8_linuxx64_dsdriver.tar.gz
sudo ksh /opt/IBM/Db2/dsdriver/installDSDriver sudo ksh /opt/IBM/x64/db2/dsdriver/installDSDriver
  sudo source /opt/IBM/x64/db2/dsdriver/db2profile

Restart the Apache Server: sudo /etc/init.d/apachesc9 restart

Creating a Connection with ScriptCase

  • Access ScriptCase using the URL http://127.0.0.1:8090/scriptcase
  • After accessing ScriptCase, access or create a new project, click on the new connection icon or access “Database > New Connection”

Creating a new connection Creating a new connection

  • After that, you will see a page with all the database connections that you can create. Select a “DB2” connection

 Selecting a Linux database connection Selecting a Linux database connection

  • New connection : You will place the information of the connection to your database here:

 Connecting with Linux database Connecting with Linux database

  • Connection Name : Defines the name of your new connection.
  • DBMS Driver : Allows you to select the drivers: DB2 Generic ODBC, DB2 Generic ODBC 6 or lower, DB2, DB2 Native ODBC.
  • Server/Host (Name or IP) : Insert the name or IP of the server where the Linux database is located.
  • Database Name : Inform the database name.
  • Schema : You can inform the Schema (It is optional), in case you want to use the tables that are part of a Schema.
  • Username : Inform the user to access the Linux database.
  • Password : Inform the password to access the Linux database.
  • Test Connection : Displays a message of the status of the connection if successful or not.

  • For more options on connecting, click on the Advanced tab:

 Advanced setup for the Linux database Advanced setup for the Linux database

  • autocommit - Enables or disables the auto commit functionality.
  • i5_lib - A value of characters that indicates the default library that will be used to solve unqualified file references. This is not valid if the the connection is using the system nomination mode.
  • i5_naming - Enables or disables the system nomination mode of the DB2 UDB CLI iSeries. The files are qualified when using dash (/) delimiter. Unqualified files are solved using the list of libraries to work.
  • i5_commit - Select the desired option treating the date of the IBM DB2.
  • Decimal Separator - Select the separator type, between a dot or a comma.
  • Persistent Connection - Persistent Connection are connections that do not close when finishing a script.
  • Use the schema before table name - Allows the use of schemas before the name of the tables.

  • Filter : Accessing this tab, we can setup which tables will be listed on this connection:

Filtering the Linux database Filtering the Linux database

  • Show - Allows the display of the the filters on the tables, views, System Tables and procedures.
    • Tables - Allows to setup the display of Tables from your database.
    • Views - Allows to setup the display of Views from your database.
    • System Tables - Allows to setup the display of System Tables from your database.
    • Procedures - Allows to setup the display of Procedures from your database.
  • Searches - Allows to define which tables and Owner will be displayed.
    • Tables - Allows to define a prefix (prefix%) or name of the tables for display.
    • Owner - Allows to define the owner of the tables for listing.
    • Show - Allows to define what will be displayed or not from the table an owner’s setup.